Adjusting the end stop, Adjusting the angle of the output tray – Kodak i1800 Series User Manual
Page 25
Advertising
A-61555 March 2007
3-9
Adjusting the end stop
Adjust the output tray end stop to slightly longer than the longest
document being fed.
Adjusting the angle of the
output tray
In addition to adjusting the back of the output tray, you can adjust the
front of the tray by swinging the height adjustment wire out from
underneath the output tray and placing it in one of the detent positions.
1. Lift the front of the output tray.
1
2
3
4
Advertising