Running a transport cleaning sheet – Kodak i1800 Series User Manual
Page 78
Advertising
A-61555 March 2007
5-13
7. When finished with all cleaning procedures, reinstall the output tray.
8. Turn on the scanner.
Running a transport
cleaning sheet
The transport should be cleaned with a Transport Cleaning Sheet fed
several times.
1. Remove the wrapping from the Transport Cleaning Sheet.
2. Adjust the side guides to the widest position.
3. Place the transport cleaning sheet in the center of the input elevator
in landscape orientation with the adhesive side up.
4. Select Count Only Mode from the Idle screen.
Advertising