Kodak i1800 Series User Manual
Page 77
Advertising
5-12
A-61555 March 2007
Lower imaging guide
1. Turn the screw on each end of the lower imaging guide, remove it
from its position and set it aside.
2. Carefully vacuum the areas between the lamps, then use a Staticide
wipe to thoroughly clean the glass plate between the lamps.
3. Clean the lower imaging guide thoroughly with a Staticide wipe.
4. Wipe the imaging guide again with an almost-dry Staticide wipe to
remove any streaks.
5. Reinstall the lower imaging guide.
6. Close the pod.
Advertising