Kodak i1800 Series - Manual (Page 86)

A-61555 March 2007 6-1
6 Troubleshooting
This chapter provides:
• Information on how to access the Operator Log.
• A problem solving chart.
• A message listing of possible errors you may encounter while using
the scanner.
Accessing the
Operator Log
The Operator Log is accessed through the Operator Control Panel
touchscreen or Scan Validation Tool.
Accessing the Operator
Log from the
touchscreen • From the Idle screen, touch Operator Log.
NOTE: The Operator Log only displays messages since the last
power-cycle of the scanner, while the Scan Validation Tool
can display all messages that have occurred. To view
messages which have been cleared from the Operator
Control Panel touchscreen, see the next section.