Kodak i1800 Series - Manual (Page 24)

3-8 A-61555 March 2007
Adjusting the output tray
for document lengths up to
43.2 cm (17 in.) Adjusting for document length involves selecting an output tray position
and angle, positioning the end stop, or removing the end stop and
installing a document extender. Reviewing the following table will help
you determine the best position for your output tray and your stacking
needs.
Positioning the output tray There are three positions that the output tray can be placed in.
1. Lift the front of the output tray and pull it out of position.
2. Set the back of the tray either in the upper position (1), lower
position (2) or forward position (3) as desired.
Position Stacking capacity Maximum document
length with end stop
1 Up to 250 documents 35.6 cm (14 in.)
2 Up to 500 documents 35.6 cm (14 in.)
3 Up to 500 documents 43.2 cm (17 in.)
1
2
3