Liebert Series 600T - Manual (Page 16)

10 Introduction
1.5 Operator Controls
The Liebert Series 600T UPS System Control Cabinet (SCC) and each individual module are equipped with a
microprocessor-based Operator Display Screen and Control Panel designed for convenient and reliable opera-
tion.
The front panel location of the monitoring and control system enables the user to quickly identify the current sta-
tus of the UPS and to perform most of the manual operations. The operator display screen is driven by an easy-
to-follow menu-prompted software program that controls and monitors the UPS system.
Figure 4 SCC Controls and Display Screen with Example of the Monitor/Mimic Screen
The operator controls and Monitor/Mimic screen for the System Control Cabinet (SCC) are shown in Figure 4.
The controls and display screen for each UPS module are shown in Figure 5. Each cabinet (SCC or module) has
the displays and controls required to monitor and perform its functions.
Figure 4 shows a three-module system designed for redundant operation. A multi-module UPS system may
include up to six (6) modules for each SCC.
Detailed instructions on how to interpret the displays and use the controls are in 3.0 - Operation.