Lucent Technologies 9077 16S - Manual (Page 123)

Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-9
“NetStar GigaRouter %s RX Interface Initializing:”
Code Version: %s
Compiled in: %s,
on: %s.
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/main.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the RX-CPU starts the execution of its
run-time software. The message is used to log the version the software executed.
“NetStar GigaRouter %s TX Interface Initializing:”
Code Version: %s
Compiled in: %s,
on: %s.
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/main.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the TX-CPU starts the execution of its
run-time software. The message is used to log the version of the software executed.
“RX: Clock is valid.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_rc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when Receive TBIC’s STI clock becomes valid.
“RX-CPU Loaded msg received from TX-CPU.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_ipc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: Logged when the TX Side run-time software is successfully loaded.