Lucent Technologies 9077 16S - Manual (Page 43)

Configuring the SP Switch Router Adapter
Installing the PCMCIA spinning disk
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 2-9
hold=4
size=1
remove=y
local=y
logfile=/var/portcards/grdump.*
#################################################################
# cleanup our own log file, if necessary.
#################################################################
DEFAULTS
hold=2
local=y
size=10000
logfile=/var/log/grclean.log
The /etc/grclean.logs.conf file is used to set size limits on log files. Here are some
sample entries:
*****************************************************************
* Log files that used to be archived by the
*/etc/{daily|weekly|monthly} scripts.
*****************************************************************
size=150000
logfile=/var/log/gr.console
size=11000
logfile=/var/log/gr.boot
7 Save all changes and reboot:
# grwrite -v
# reboot -i
8 Verify that the PCMCIA interface and device are up:
# csconfig -a
Slot 0: flags=0x3<UP,RUNNING>
Attached device: wdc2
Manufacturer Name: "Kingston Technology"
Product Name: "DataPak 520"
Function ID: 4 (PC card ATA)
Assigned IRQ: 11
Assigned I/O port1: 0x3d0-0x3df
Slot 1: flags=0x5<UP,EMPTY>
9 To run a quick test, execute the grconslog command. If the command runs, these steps
have been performed correctly:
# grconslog