Lucent Technologies 9077 16S - Manual (Page 126)

B-12 October 22, 1999 SP Switch Router Adapter Guide - 1.4 Update 2
Log Messages
Message descriptions
DESCRIPTION: This message is logged when RX-CPU sends an interface reset message
to the TX-CPU when the state machine is changing from RUNNING to other states.
“Sending mib-2 trap, type = %d, state = %d.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_cnfg.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the SP Switch Router Adapter card sends
a trap request to the mib2d. mib2d, in turn, will generate and send a TRAP PDU to the
managers.
“Sending params to TX...”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/main.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the RX-CPU sends the board’s
configuration parameters to the TX-CPU.
“State machine changes from xxx to yyy.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: The SP Switch Router Adapter card's state machine is changing from
the xxx state to yyy state where xxx and yyy are the values of the card state:
- Configured = 2
- Off-line = 3
- Off-line-Q = 4
- Running = 5
- Quiesced = 6
“State machine changes from xxx to yyy.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: The SP Switch Router Adapter card's state machine is changing from
the xxx state to yyy state where xxx and yyy are the values of the card state:
- Configured = 2
- Off-line = 3