Lucent Technologies 9077 16S - Manual (Page 131)

Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-17
“RX: Setting the RC in operational mode, stat=0x%x.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_rc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the RX Side of the SP Switch Router
Adapter card is ready to receive data messages from the switch.
“Timed out resolving ARP. If: %d IP: %d.%d.%d.%d.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_arp.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged whenever the TX-CPU fails to resolve an IP
address. This message indicates that either the node with the IP address does not receive
nor send the ARP request/reponse or the node is down.
“TX-CPU: Access FIFO busy, discarding IP packet.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_arp.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged whenever the TX-CPU discards an IP packet
due to the link (TBIC) congestion. This log message indicates that, potentially, the switch
is congested.
“TX-CPU Config Params msg received from RX-CPU.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_ipc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the TX-CPU receives the board’s
configuration parameters from the RX-CPU.
“TX-CPU sending msg type=%d to RX-CPU.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_ipc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged whenever the TX-CPU sends a message to the
RX-CPU via the IPC channel.