Sample messages log, Sample messages log -33, Figure 3-4 – Lucent Technologies 9077 16S User Manual

Page 109: Sample entries in the messages log -33

Advertising
background image

Monitoring and Management Tools

SP Switch Router logs

SP Switch Router Adapter Guide - 1.4 Update 2

October 22, 1999

3-33

Sample messages log

The

messages

log is the general operating system log. It contains boot or deadstart

commentary, system-level warnings, and error messages.

In the excerpt below, the third line from the top shows the SP Switch Router Adapter card,
DEV1, being configured with its interface name,

gt020

.

This is a sample

messages

log from the SP Switch Router with host name

tester.site.com

.

Figure 3-4. Sample entries in the messages log

tester-6 more messages

Feb 10 03:30:17 tester grinchd[122]: sendto: No buffer space available

Feb 10 10:49:57 tester kernel: de0: framing error

Feb 10 10:04:52 tester kernel: gt020: creating interface: GigaRouter DEV1, GRIT

address 0:7:0

Feb 10 10:04:58 tester kernel: gs0b0:creating interface: GigaRouter HSSI, GRIT

address 0:0xb:0

Feb 10 10:04:59 tester kernel: gf080: creating interface: GigaRouter FDDI, GRIT

address 0:8:0

Feb 10 10:04:59 tester kernel: gf081: creating interface: GigaRouter FDDI, GRIT

address 0:8:1

Feb 10 10:04:59 tester kernel: gf082: creating interface: GigaRouter FDDI, GRIT

address 0:8:2

Feb 10 10:04:59 tester kernel: gf083: creating interface: GigaRouter FDDI, GRIT

address 0:8:3

Feb 17 15:57:39 tester kernel: uid 26 on /usr: file system full

Feb 17 15:57:54 tester last message repeated 2 times

Feb 17 19:47:53 tester Error opening grifconfig file drifconfig.conf. Exiting.

Feb 17 20:04:32 tester last message repeated 6 times

Feb 17 21:54:40 tester login: ROOT LOGIN (root) ON ttyp1 FROM mondo

Feb 17 21:55:58 tester LMI type STANDARD is not supported, type NONE is selected

Feb 17 21:55:58 tester last message repeated 6 times

Feb 17 22:44:57 tester fr[5898]: Route Circuit configured on an un-defined link

Feb 17 22:44:57 tester fr[5898]: Slot: 1, Link: 0

Feb 17 22:44:57 tester fr[5898]: Switch Circuit configured on an un-defined link

Feb 17 22:44:57 tester fr[5898]: Slot: 0, Link: 1

Feb 17 22:50:39 tester fr[6025]: un-supported auto-grif i/f name configured

Feb 17 22:50:39 tester fr[6025]: I/F name:gO060, Slot=6, Port=0

Feb 17 22:50:40 tester fr[6025]: Route Circuit configured on an un-defined link

Feb 17 22:50:40 tester fr[6025]: Slot: 6, Link: 0

Feb 18 10:02:59 tester reboot: rebooted by root

Feb 18 10:02:59 tester syslogd: exiting on signal 15

Feb 18 10:04:17 tester kernel: Kernel #0 (nit): Thu Feb 13 08:46:56 CST 1999

Feb 18 10:04:17 tester kernel: cpu = 80486 (about 66 MHz)

Feb 18 10:04:17 tester kernel: delay multiplier 1050

Feb 18 10:04:17 tester kernel: real mem = 37748736

Feb 18 10:04:17 tester kernel: avail mem = 34865152

Feb 18 10:04:17 tester kernel: buffer cache = 3608576

Feb 18 10:04:17 tester kernel: isa0 (root)

tester-7

Advertising
This manual is related to the following products: