Lucent Technologies 9077 16S - Manual (Page 117)

Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-3
Message descriptions
For each message described, related information to the message is also included to aid in
analysis and interpretation:
– LOG_FILE provides the name of the file where the message text is written
– SOURCE_FILE specifies the software module that generates the message
– SCOPE specifies the scope of the message, either CARD (media card) or RMS
(management software)
– CONTEXT specifies the state of the SP Switch Router Adapter card:
INIT = initialization phase
BIST = Built-In-Self-Test phase
RUNNING = operational phase
– SEVERITY specifies the severity of the message: INFO, WARNING, ERROR, or
FATAL
– DESCRIPTION provides additional information (when, why, how) about the
message.
References to “IOSTB3” should be read as the SP Switch Router Adapter card, dev1 .
“Access FIFO Sync Error from RC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the RX-CPU detects that the CPU and the
RC are out-of-synch. This is a fatal error. The card is reset and automatically reloaded.
int1 is the content of the RC’s interrupt register.
“Access FIFO Sync Error from TC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the TX-CPU detects that the CPU and the
TC are out-of-synch. This is a fatal error. The card is reset and automatically reloaded.
int1 is the content of the TC’s interrupt register.
“ACK WORDS: 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%08x”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD