Sp switch router adapter media card states (snmp) – Lucent Technologies 9077 16S User Manual
Page 32
1-16
October 22, 1999
SP Switch Router Adapter Guide - 1.4 Update 2
Introduction to the SP Switch Router Adapter card
SNMP on the SP Switch Router Adapter card
The object
ibmSPDepNodeName
serves as an index for the
ibmSPDepNodeTable
and is
initialized to a constant text string equivalent to the corresponding chassis slot number: 00–15.
The slot numbers support SP Switch Router chassis with 4 or 16 card slots.
The objects
ibmSPDepConfigState
,
ibmSPDepNodeState
, and
ibmSPDepNodeName
are
read-only. At start up,
ibmSPDepConfigState
is set to 1 (not-configured), and is changed as
the SP Switch Router Adapter media card state changes.
SP Switch Router Adapter media card states (SNMP)
These states are available as possible instance values for the SNMP
ibmSPDepConfigState
object, but are not directly viewed by the user:
1 -
notConfigured
(card is initialized)
4 -
diagnosticFailed
(card’s own on-board diagnostics fail)
5 -
microcodeLoadFailed
(card is waiting for valid, not null, configuration parameters)
6 -
fullyConfigured
(card is initialized, configured, ready to be brought on line
with the SP)