Lucent Technologies 9077 16S - Manual (Page 63)

Configuring the SP Switch Router Adapter
Step 3. Change profile settings
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 2-29
To specify dump on panic and dump when card hangs, you OR together 0x0004 (dump on
card panic) and 0x0010 (dump whenever card is hung). The result in hex is 0x0014, or 20 in
decimal. You could specify either of these settings to get the same result:
super> set config = 0x14
or:
super> set config = 20
super> write
DUMP/ written
After you save (write) your specified value and you later read the field, you will see the panic
and hang setting displayed as
config = 20 .
To specify dump during panic, reset, and power up, you OR together 0004, 0008, and 0020.
The result in hex is 0x2c, the decimal equivalent is 44. Both settings produce the same result:
super> set config = 0x2c
or:
super> set config = 44
super> write
DUMP/ written
After you save (write) your specified value and you later read the field, you will see the panic,
reset, and power up setting displayed as 44.
Dump vectors (read-only)
The segment-table fields in the dump-vector-table describe the areas in core memory
that will be dumped for all SP Switch Router Adapter cards. These are read-only settings, you
cannot change them.
Here is the path, cd .. go back up to the main level if necessary:
super> cd ..
super> list dump-vector-table
3 = {3 rmb "RMB default dump vectors" < {1 SRAM 262144 524288} > +
5 = {5 atm-oc3-v2 "ATM/Q default dump vectors" <{1 "atm inst memo+
6 = {6 fddi-v2 "FDDI/Q default dump vectors" < {1 "fddi/Q CPU0 co+
7 = {7 hssi "HSSI default dump vectors" < {1 "hssi rx SRAM memory+
8 = {8 ethernet-v1 "ETHERNET default dump vectors" <{1 "Ethernet +
9 = {9 dev1 "DEV1 default dump vectors" <{1 "dev1 rx SRAM memory"+
10 = {10 atm-oc12-v1 "ATM OC-12 default dump vectors" <{1 "ATM-12+
11 = {11 sonet-v1 "SONET default dump vectors" <{1 "SONET rx SRAM+
14 = {14 atm-oc12-v2 "ATM OC-12-V2 default dump vectors" <{1 "ATM+
This sequence shows the segments in the SP Switch Router Adapter card that are dumped:
super> list 9
index = 9
hw-type = dev1
description = "DEV1 default dump vectors"
segment-table = <{1 "dev1 rx SRAM memory" 2097152 2097152} {2"dev1+
super> list seg
1 = { 1 "dev1 rx SRAM memory" 2097152 2097152 }
2 = { 2 "dev1 shared SRAM memory" 131072 32768 }