Lanier 5622 - Manual (Page 19)

Preparation Sequence
11
2
Using the Document Server
If the Document Server is used with the network delivery scanner, perform steps
C to E on p.10 “Using as a Network Delivery Scanner” after performing the
steps below.
Connect the machine to the network with an Ethernet cable.
⇒System Settings manual
Check the network settings in System Settings, and change if re-
quired.
⇒System Settings manual
Make settings for the Document Server, such as the setting of the
scanning feature and original orientation priority information.
⇒ p.12 “Initial Scanner Setup”
On the client computers, install the software required for view-
ing the documents stored in the Document Server, such as Desk-
TopBinder V2 Lite.
⇒ p.27 “DeskTopBinder V2 Lite”
Connect to Network
1
Make System Settings
2
3
Make Scanner
Settings
4
Install Software