Lanier 5622 - Manual (Page 31)

Installing Software
23
2
Installing Software
The machine comes with two CD-ROMs containing various software.
The CD-ROM labeled "Scanner Driver & Document Management Utilities" con-
tains the necessary software to use the machine as a network scanner. The CD-
ROM labeled "Printer Driver & Utilities" contains the necessary software to use
the machine as a printer.
This section explains the software contained on the "Scanner Driver & Docu-
ment Management Utilities" CD-ROM.
Reference
For information about the software contained on the "Printer Driver & Utili-
ties" CD-ROM, see the Printer Reference manual.
Auto Run Program
When the CD-ROM is inserted into a computer in Windows 95/98/Me, Win-
dows 2000, or Windows NT 4.0, the installer starts automatically (Auto Run) to
install the TWAIN driver and various software.
Note
❒ Auto Run might not automatically work with certain OS settings. In this case,
launch "CDLaunch.EXE" located on the CD-ROM root directory.
❒ If you want to install without using Auto Run, hold down the Shift key while
inserting the CD-ROM. Keep the Shift key held down until the computer has
finished accessing the CD-ROM.
❒ If [Cancel] is pressed during installation, the installation will be stopped and
the remaining scanner driver and utilities will not be installed. If [Cancel] has
been pressed, reinstall the remaining scanner driver and utilities after restart-
ing the computer.
Limitation
❒ If your system is Windows 2000 or Windows NT 4.0, log on using an account
that has Administrators permission.