Lanier 5622 - Manual (Page 44)

Setting Originals
36
3
B Place the top edge of the origi-
nal first.
When using the machine as a
network TWAIN scanner, this
orientation is the standard set-
ting in the TWAIN driver. Nor-
mally, use this orientation for
placement.
C
Select the appropriate orientation
on the control panel or on the
computer so that it matches the
orientation of originals placed.
Reference
⇒ p.37 “Original Orientation
and Scan Area Setting”
Placing the Divided Original in
the Automatic Document
Feeder (SADF)
When originals are placed in the
ADF, scanning finishes as one docu-
ment when the scan of all originals
are completed by factory default. If
the next original is placed within a
certain amount of time after all origi-
nals are scanned, these multiple doc-
u m e n t s c a n b e s c a n n e d a s o n e
document by the SADF.
After the originals are scanned, the
remaining time for accepting the next
original is displayed.
When there is another page to scan,
set it within the specified time. If set,
the original is feeded and scanned au-
tomatically. If there is no more page,
press
{#} key.
Note
❒ To use this function, settings must
be made in the Initial Scanner Set-
up.
⇒ p.19 “SADF Auto Reset
Timer”
❒ Originals are scanned in order.
Place them from the first page.