Lanier 5622 - Manual (Page 56)

Delivering Stored Scan Data by the Network Delivery Scanner
48
5
B Select the sender.
• Selecting a sender from the
title category is done by us-
ing the same procedure as
when selecting a destination.
See step
F .
• To select a sender using a
short ID number, enter the 3-
digit ID number with the
number keys.
C Press [OK].
The sender is applied.
H
If required, select a subject.
Select a subject from the pro-
grammed ones.
⇒ p.21 “Making
Scan Data Subject Settings”
Note
❒ When a subject has been speci-
fied, this information is added
to the scan data file. When the
optional ScanRouter V2 Profes-
sional is used to send data files
as e-mail, the subject is auto-
matically entered as a title in the
message subject.
A Press [Attach Subject].
B Select a subject.
C Press [OK].
The subject is applied.
I
Press the
{Start} key.
The original is scanned and the
scan data file is delivered to the
destination(s).
If there is another page to scan,
place the original on the exposure
glass, and then press the
{Start}
key.
When there are no more pages,
press the
{#} key.
Note
❒ To abort the scan process, press
the
{Clear/Stop} key or press
[Stop] on the display.
❒ When the SADF function is
used, load the next original.
⇒
p.36 “Placing the Divided Orig-
inal in the Automatic Document
Feeder (SADF)”