Lanier 5622 - Manual (Page 63)

Storing Data
55
6
B Select the desired resolution,
original size, and other items
to change the settings.
The way to make scan settings is
the same way as programming
scan settings. See p.14 “Setting
Scanner Features”.
C Press [OK].
The scan settings are applied.
F
When using the network delivery
scanner function, make the set-
tings for storing scanned data
files.
When not using the network deliv-
ery scanner function, this step is
not required. Go to step
G .
A Press [Store File].
The screen for setting storage
parameters for scanned data ap-
pears.
B Press [Store Only].
Note
❒ To store and deliver scanned
data, press [Store & Transmit].
C Press [OK].
G
Specify file information.
Specify a user name, file name, and
password for the file to be stored.
Reference
For more information about
how to specify file information,
see p.55 “Specifying file infor-
mation”.
H
Press the
{Start} key.
The original is scanned and the re-
sulting data is stored as a file in the
Document Server.
When there is another page to
scan, place the original, and then
press the
{Start} key.
When there are no more pages,
press the
{#} key.
Note
❒ To abort the scanning process,
press the
{Clear/Stop} key or
press [Stop] in the display.
❒ When originals are being scanned
using the SADF, load the next
original.
⇒ p.36 “Placing the Di-
vided Original in the Automatic
Document Feeder (SADF)”
Specifying file information
You can specify a user name, file
name, and password for a stored scan
data file.
When this function is used, you can
search for files by user name or file
name, and you can prevent unauthor-
ized persons from accessing the files.