Lanier 5622 - Manual (Page 33)

Installing Software
25
2
Software for using a Network TWAIN Scanner
To use the machine as a network TWAIN scanner, it is essential to install the
TWAIN driver.
If you do not have applications that work with TWAIN, it is necessary to also
install the DeskTopBinder V2 Lite. For information about the installation of
DeskTopBinder V2 Lite, see p.27 “DeskTopBinder V2 Lite”.
Preparation
Before installing, check the operating environment for the TWAIN driver.
⇒
p.28 “Type1027 TWAIN Driver”
Using Windows 95/98/Me, Windows 2000, or Windows NT 4.0
Install the TWAIN driver using Auto Run. Here, Windows 98 is used as an ex-
ample for explanation. The basic operations are similar for Windows 95/Me,
Windows 2000, and Windows NT 4.0.
A
Verify that Windows is running. Insert the supplied CD-ROM labeled
"Scanner Driver & Document Management Utilities" into the CD-ROM
drive of the computer.
The choose setup language screen appears.
Reference
If the installer does not start automatically, see p.23 “Auto Run Program”.
B
Select a setup language, and then click [OK].
The CD-ROM Launcher screen appears.
C
Click [Type1027 TWAIN Driver].
The software setup screen appears.
D
The installer of the TWAIN driver starts. Follow the instructions on the
screen.
Note
❒ When the installation is complete, a message to prompt you to restart the
computer may appear. In this case, restart the computer, and continue the
operation.
❒ After the installation is complete, "Type1027 TWAIN V3" folder is created
in the "Program" folder of the Start menu. Help can be displayed from
here. Notes on using the network TWAIN scanner are provided in "Re-
adme.txt". Be sure to read them before use.