Lanier 5622 - Manual (Page 34)

Preparations for Use as a Network Scanner
26
2
Software for using a Network Delivery Scanner
To use the machine as a network delivery scanner, it is essential to install Scan-
Router V2 Lite on the delivery server. To check an in-tray or auto-receive the
documents, it is necessary to install DeskTopBinder V2 Lite on the client compu-
ter. Also, the documents can be auto-received by installing only ScanRouter V2
Link on the client computer.
Use Auto Run for installation. Here, Windows 98 is used as an example for ex-
planation. The basic operations are similar for Windows 95/Me, Windows 2000,
and Windows NT 4.0.
Preparation
Before installing, check the operating environment for each software.
⇒ p.28
“Software Supplied on CD-ROM”
A
Verify that Windows is running. Insert the supplied CD-ROM labeled
"Scanner Driver & Document Management Utilities" into the CD-ROM
drive of the computer.
The choose setup language screen appears.
B
Select a setup language, and then click [OK].
The CD-ROM Launcher screen appears.
C
Click the key of the software to be installed.
• The ScanRouter V2 Lite installer starts by clicking [ScanRouter V2 Lite].
• The DeskTopBinder V2 Lite installer starts by clicking [DeskTopBinder V2
Lite] .
The change the language screen appears.
Reference
For information about the subsequent installation procedure, see the Setup
Guide that can be displayed from the Setup screen of the respective soft-
ware.
D
Select a language used by this component, and then click [OK].
The software setup screen appears.