Lanier 5622 - Manual (Page 26)

Preparations for Use as a Network Scanner
18
2
F
Press [Yes].
The selected scan setting is delet-
ed.
G
Press [Exit].
The display returns to the Scanner
Features screen.
H
Press [Exit].
The main menu is shown again.
Making Scanner Settings
This section explains how to switch
from network TWAIN scanner mode
to network delivery scanner or Docu-
ment Server mode, and how to set the
compression of image data and initial
values for setting originals.
The scanner settings consist of the fol-
lowing. For the list about settings and
factory defaults, see p.13 “Scanner
settings”.
❖ ❖ ❖ ❖ Function Priority
S e l e c t " D e l i v e r y / S t o r e " o r
"TWAIN" to determine whether
t h e net w ork TW A IN s can n er
mode, network delivery scanner
mode, or Document Server mode
is initially active when the scanner
function is selected by pressing the
{Scanner} key on the control panel.
Note
❒ When "TWAIN" is selected, the
network TWAIN scanner mode
is set. By pressing [Cancel] in
this condition, you can switch to
network delivery scanner oper-
ation or Document Server oper-
ation.
❒ When "Delivery/Store" is se-
lected, the network delivery
scanner mode or the Document
Server mode is set. It is not pos-
sible to switch network TWAIN
scanner operation from these
modes. To use the machine as a
network TWAIN scanner, ac-
cess the machine from a client
computer using the TWAIN
driver.
❖ ❖ ❖ ❖ Delivery/Store Connection Time out
When using the machine as a net-
work delivery scanner or Docu-
ment Server, scanning request to
the machine as a TWAIN scanner
will switch the machine to the net-
work TWAIN scanner mode. This
setting determines the delay until
the machine switches to network
TWAIN scanner mode.
• Selecting "Immediate" causes
the network TWAIN scanner
mode to be activated at once.
• When you select "Yes", you can
enter the delay time with the
number keys (3 - 30 seconds).
W h e n t h e T W A I N s c an n e r
mode is activated, only the time
specified here passes from the
last key operation.