Polaris TBM 200 LH - Manual (Page 2)

INSTALLATION, OPERATION AND MAINTENANCE MANUAL
POLARIS - SERIES TBM 200 LH ( 8” ) - TYPE PHO / PBO / PVO
2of 29
DOCUMENT NBR. : PED-010 REVISION: 1 EFFECTIVE
DATE: 08-24-2004
TABLE OF CONTENTS
SECTION 1.0 INTRODUCTION
SECTION 2.0 WARRANTIES
SECTION 3.0 SAFETY
SECTION 4.0 MECHANICAL INSTALLATION
4.1 RECEIVING INSPECTION
4.2 STORAGE
4.2.1 NEW PUMP AND EQUIPMENT STORAGE
4.2.2 USED PUMP STORAGE
4.2.3 SPARE PARTS STORAGE
4.3 HANDLING
4.4 MECHANICAL SEAL INSPECTION
4.5 PUMP SET UP / MOUNTING
4.5.1 CABLE AND CHAIN SUSPENSION
4.5.2 OPTIONAL LIFTING / SUSPENSION BAIL MOUNTING
4.5.3 FLOOR MOUNTING
4.6 PIPING
4.6.1 DISCHARGE PIPING / DISCHARGE HOSE
4.6.2 PRIMARY SEAL FLUSH PIPING
4.6.3 OPTIONAL WATER JACKET / PIPING
4.6.4 OPTIONAL
WATER JET RING
SECTION 5.0 ELECTRICAL INSTALLATION
5.1 GENERAL
5.2 MOISTURE DETECTION RELAY - THERMAL PROTECTION
5.3 INSTALLATION
REFER TO THE RELIANCE ELECTRIC MOTOR
INSTALLATION & MAINTENANCE MANUAL FOR
DUTY MASTER  SUBMERSIBLE MOTORS (SECTION 8.2)