Polaris TBM 200 LH - Manual (Page 6)

INSTALLATION, OPERATION AND MAINTENANCE MANUAL
POLARIS - SERIES TBM 200 LH ( 8” ) - TYPE PHO / PBO / PVO
6of 29
DOCUMENT NBR. : PED-010 REVISION: 1 EFFECTIVE
DATE: 08-24-2004
3.0 SAFETY
Do not install the equipment other than in accordance with the instructions contained in this
manual.
When required information cannot be found in this manual, contact the nearest POLARIS PUMPS
representative.
This instruction book should be read completely before starting installation, maintenance or
operation. The equipment is capable of trouble free operation when properly installed, operated
and maintained. These instructions present the basic information and methods required for
proper installation and maintenance.
This pump has been designed to provide safe and reliable service, however as with all equipment
of this type, the operator(s) must exercise good judgment and proper safety practices to avoid
damage to the equipment and surroundings and to avoid personal injury. The instructions in this
manual are intended for personnel with a general training in operation and maintenance of
centrifugal pumps and electric motors.
It is assumed that your safety department has established a safety program based upon a
thorough analysis of industrial hazards. Before installing, operating or performing maintenance on
the pump and associated components described in this manual, it is suggested that the safety
program be reviewed to ensure that it covers the hazards arising from rotating- and electrical
machinery. In general, all personnel should be guided by all the basic rules of safety associated
with the equipment and the process.
It should be understood that the information contained in this manual does not relieve operating
and maintenance personnel of the responsibility of exercising normal good judgment in operation
and care of the pump and its components.