Processing a letter without optional scale, Processing parcels, 3 • running mail – Pitney Bowes K700 User Manual
Page 28
3-4
SV61503 Rev. A
3 • Running Mail
Processing a Letter Without Optional Scale
Use this method when you already know the weight of a mail piece
and you are not using the optional scale.
1. Press Menu.
2. Use the Review keys to scroll and select "Type in a Weight?”.
3. Key in the weight in grams and press Enter/yes.
NOTE: If there was no class specified on the display when you
entered the weight, you may need to scroll and select the desired
class (if you are unsure if a particular class is best for your mail
piece, call your local post office or visit www.canadapost.ca). Oth-
erwise, the postage meter selects a class based on the weight of
the mail piece.
4. The display shows the final postage amount and class chosen.
5. Slide the envelope (or tape sheet if mail piece is too big for ma-
chine) into the mail deck. The postage meter prints the digital
indicia and indicates when to remove the mail piece.
����
�����
�����
���
�
���
���
����
����
���
���
���
�����
���
���
����
�����
�
�����
�
��
���
�����