Panasonic DBS 824 - Manual (Page 103)

Call Hold Key Telephone Features
3-16 DBS 824-3.0/3.2-700 Revised April 2000
• The phone issues intercom dial tone.
• “Hold TRK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Hold from the extension that
placed it there:
Press the line key that is flashing green.
• The line LED stops flashing and remains lit.
• “CO TALK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Trunk Hold from a different
extension:
Press the line key that is flashing red.
• The line LED turns green and stops flashing.
• “CO TALK TRK #XX” (where “XX” is the outside line number) appears
on the display.
Related Programming
• FF1 (System): Attendant Hold Recall Timer for CO Calls
• FF1 (System): Attendant Hold Recall Timer for Intercom Calls
• FF1 (System): Extension Hold Recall Timer for CO Calls
• FF1 (System): Extension Hold Recall Timer for Intercom Calls
• FF1 (System): Key Bank Hold
• FF1 (System): Non-Appearing Trunk Hold
Considerations
• When using an outside line for which there is no line key on your
extension, press the HOLD key to place the call on hold and then press a
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)