Panasonic DBS 824 - Manual (Page 45)

Paging System Features
1-28 DBS 824-3.0/3.2-700 Revised April 2000
Paging
(CPC-S and CPC-M)
Description
Internal paging is accomplished through the speakers of your system’s key
phones. The Paging feature allows you to contact someone temporarily away
from an extension, give instructions to an entire group, or communicate with
several people at once. If an external paging system is connected to your
system, pages can also be sent through its speakers.
The Paging feature can also be programmed to time out after sixty seconds.
When a page call times out, a busy tone is sent to the extension that initiated
the page.
Operation
To use the Paging feature:
1. Pick up the handset.
2. Press “#,” then enter the number of the desired Paging Group (00-07).
The EXT LED lights.
3. Make your announcement.
4. Replace the handset.
Related Programming
• FF1 (System): Page Duration
• FF1 (System): External Page Interface Control for Paging Groups
• FF3 (Extension): Page Group (0-7) Extensions
Hardware Requirements
• External relays and an amplifier are required for external paging.
Considerations