Panasonic DBS 824 - Manual (Page 73)

Attendant-Controlled Text Assignment Attendant Features
2-8 DBS 824-3.0/3.2-700 Revised April 2000
3. Dial #1
4. Press AUTO.
5. Dial the desired system speed dial number (00-89 or 000-199).
6. Press AUTO to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
8. To store your entry, press HOLD.
To assign text to Call Waiting/OHVA Text Replies):
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #5
4. Dial 1-5, depending on which text message you want to change.
5. Press AUTO to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
7. To store your entry, press HOLD.
Table 2-1. Key sequences for text assignment.
Key Number of Key Presses
Once Twice Three
times Four
times Five
times Six
times
1 Space Q Z Space q z
2 A B C a b c
3 D E F d e f
4 G H I g h i