Panasonic DBS 824 - Manual (Page 196)

DSLT Features Meet-Me Answer
Revised April 2000 DBS 824-3.0/3.2-700 4-25
2. Dial a trunk access code (81-86 or 9).
3. Press the REDIAL key.
Considerations
• If the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone. The last number dialed can
then be redialed.
• The Last Number Redial feature can redial a number up to sixteen digits
long.
• A maximum of five Speed Dialing codes can be redialed.
Meet-Me Answer
(CPC-S and CPC-M)
Description
You can answer a Paging call from any extension using the Meet-Me Answer
feature.
Operation
1. Pick up the handset from any extension at which you hear a Paging call.
2. Press “77.”
Paging ceases and you are connected to the paging party.
Related Programming
• FF1 (System): Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment
Considerations
• The Meet-Me Answer feature cannot be used with Paging Group 00.
• You can only use the Meet-Me Answer feature at an extension that does
not have an incoming call.