Panasonic DBS 824 - Manual (Page 56)

System Features Toll Restriction
Revised April 2000 DBS 824-3.0/3.2-700 1-39
The following calling restrictions are also available:
• Station Lockout Key Code Restriction
A key code must be entered before calling out when the Station Lockout
feature is activated.
• Account Code Restriction
An Account Code must be entered before calling out.
2 Local calls allowed
1-800 calls allowed
Inbound trunk calls can be answered and transferred from a Type 2 phone.
Full restriction of international calls.
Full restriction of operator calls.
Speed dial number selectable restriction.
N11 code selectable restriction except 911.
Restriction of up to 50 seven-digit numbers.
Inter-digit timing is set to 6 seconds.
3 1-800 calls allowed.
Full restriction of operator calls.
Selectable restriction of international calls.
Selectable restriction of N11 codes (211-811).
Speed dial number selectable restriction.
Restriction of up to 50 seven-digit numbers.
Trunk calls can be answered and transferred.
Defaulted to full restriction of area-code dialing (see Notes).
Defaulted to full restriction of office-code dialing (see Notes).
Inter-digit timing is set to 6 seconds.
4 Identical to Type 3, except that office-code dialing is allowed by default; type 4 also
allows Operator Calls (Type 3 does not allow Operator Calls) (See Notes).
5 Programmable TRS Type; defaulted to no restrictions (see Notes).
6 Programmable TRS Type; defaulted to no restrictions (see Notes).
7 No restriction of outbound dialing.
Notes:
For TRS types 3-6, operator calls are allowed if FF7 1# 1# is set to “on.” The office code tables are used to restrict
all 0 plus dialing; the next two digits will also be analyzed.
For TRS types 3-6, area code and office code restrictions can be changed using “Area Code Table For TRS Types
3-6‚” “Office Code Table For TRS Types 3-6‚” “Special Area Code Table For TRS Types 3-6‚” and “Special
Office Code Table For TRS Types 3-6‚” explained in Chapter 8 of Programming (Section 400).
For TRS types 3-6, area and office code restrictions can be further managed using “Special Area Code Table For
TRS Types 3-6” and “Special Office Code Table For TRS Types 3-6” found in Chapter 8 of Programming (Sec-
tion 400). Four area codes can be associated with special area code tables 1-4 (one area code per table). Within
each of these tables, the entire range of valid office codes can be individually allowed or restricted. Thus, the Spe-
cial Area and Office Codes work together to provide specific toll restrictions.