Panasonic DBS 824 - Manual (Page 115)

Call Waiting/OHVA Text Reply Key Telephone Features
3-28 DBS 824-3.0/3.2-700 Revised April 2000
• If Onhook Call Transfer has been enabled and you have placed an outside
line on hold to answer Call Waiting, replace the handset after the other
extension hangs up. If the caller hangs up first, the held call will be
transferred to the called extension.
• Call Waiting cannot be sent to an ML key.
Call Waiting/OHVA Text Reply
(CPC-S and CPC-M)
Description
When a busy party receives an indication of incoming intercom call, the busy
party can respond by sending a text message back to the caller.
The text message can be sent after any of these intercom call indications:
• Call waiting tone
• Call waiting tone followed by a text message
• An offhook voice announce.
Operation
When you are on a call and receive an indication of a incoming intercom call,
press CONF and then dial 1-5.
The following table shows the default text associated with messages 1-5.
Messages 1-5 can be changed through system programming.
Programming
• FF6 (Names and Messages): Call Waiting/OHVA Text Reply
Message Number Message Definition
1 Take A Message
2 Please Hold
3 Will Call Back
4 Transfer
5 Unavailable