Panasonic DBS 824 - Manual (Page 210)

SLT Features Auto Redial
Revised April 2000 DBS 824-3.0/3.2-700 5-5
settings:
- Direct trunk calls
- Transferred trunk calls.
Auto Redial
(CPC-S and CPC-M)
Description
If the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed.
Related Programming
• FF3 (System): Auto-Redial on Extensions
• FF1 (System): Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment
Auto-Repeat Dial
(CPC-S and CPC-M)
Description
When a called outside party is busy, pressing the REDIAL key while hearing
busy tone automatically redials the number. The system will keep redialing
the number until the called party answers, you hang up or the Auto-Repeat
Dialing Count is reached.
Related Programming
• FF1 (System): Auto-Repeat Dialing Count
• FF1 (System): Wait Timer for Auto-Repeat Dialing
• FF1 (System): Busy Tone Detection Timer