Panasonic DBS 824 - Manual (Page 163)

Speed Dialing Key Telephone Features
3-76 DBS 824-3.0/3.2-700 Revised April 2000
If you enter a trunk access code in the speed dial number, you do not have
to open a trunk before using the number.
5. Dial the number.
6. Press HOLD.
7. Press ON/OFF.
To use a programmed Personal Speed Dial key:
1. If the Speed Dial key includes a trunk access code, simply press the key.
If the Speed Dial key does not include an access code, press an unlit line
key before pressing the Speed Dial key.
• The phone issues outside dial tone.
• The line LED lights green.
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
2. Complete your call and replace the handset.
The line LED changes from green to red and then goes off.
To check a programmed Personal Speed Dial key:
1. Press the ON/OFF key:
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the CONF key.
“C” appears on the display.
3. Press a Personal Speed Dial key.
The programmed data appears on the display.
4. Press the ON/OFF key.
The ON/OFF LED goes off.