Panasonic DBS 824 - Manual (Page 165)

Speed Dialing Key Telephone Features
3-78 DBS 824-3.0/3.2-700 Revised April 2000
Considerations
• Personal Speed Dial numbers can contain up to sixteen characters,
including the “*,” “#,” FLASH (indicate “-”), PAUSE (REDIAL),
CONF, and AUTO keys.
• A dash (“-”) can be displayed in the Personal Speed Dialing number. To
display a dash, press the FLASH key where you want the dash to appear.
• If you make a mistake while programming, an alarm tone is issued and
“ERROR” appears on the display. If this happens, start again from step 1.
• Storing a new number erases any previously stored data.
• Names for Personal Speed Dialing can be programmed using a DSS
console at the Attendant Phone.
• If the called party’s number and name are stored in the Personal Speed
Dial code, that information appears on the display when you use the speed
dial code.
• Speed Dial numbers cannot be checked while Station Lockout is activated.
System Speed Dial
(CPC-S and CPC-M)
Description
Frequently called numbers can be stored using the System Speed Dial feature.
System Speed Dial numbers are programmed from the Attendant Phone and
can be used by any extension. With the CPC-S and the CPC-M set in the
standard mode, up to 90 System Speed Dial Numbers can be stored (00-89).
With the CPC-M set in the add-on mode, up to 200 System Speed Dial
Numbers can be stored (000-199).
Operation
To use a programmed System Speed Dial key:
1. Press an unlit line key.
• The phone issues outside dial tone.
• The line LED lights green.