Panasonic DBS 824 - Manual (Page 41)

Music-on-Hold System Features
1-24 DBS 824-3.0/3.2-700 Revised April 2000
Music-on-Hold
(CPC-S and CPC-M)
Description
The DBS 824 can provide Music-on-Hold to parties on hold on a CO line.
The Music-on-Hold feature can also be used to play announcements or
advertisements if desired.
The system can provide Music-on-Hold with the internal MOH resource on
systems using the MFR card option (CPC-M only). See “Background Music”
on page 1-10 for more information.
Hardware Requirements
• The music source must be purchased separately. It is not provided with the
DBS 824.
• If a single music source is used for both Music-on-Hold and background
music, the music source connects to the CN6 on the CPC. If a separate
music source is used for background music (CPC-M only), it connects to
CN6 and music-on-hold connects to CN8. See Installation (Section 300)
for instructions.
• The input impedance for the music source is 10k ohms.
• The maximum input level is 10 dB.
Related Programming
• FF1 (System): Music-On-Hold Sound Source
Important: A license may be required from the American Society of
Composers, Authors, and Publishers (ASCAP) or similar organizations to
transmit radio or recorded music through the Music-On-Hold feature.
Panasonic Communications & Systems Company, its distributors, and
affiliates assume no liability should users of Panasonic equipment fail to
obtain such a license.