Safety instructions, Sola 4000 - operating manual safety instructions – Powerware Uninterruptible Power Supply SOLA 4000 User Manual

Page 3

Advertising
background image

JUE 401263

3

SOLA 4000 - Operating Manual

SAFETY INSTRUCTIONS

The unit must be used as intended. Follow the instructions given in
the Operating Manual.

Dangerous voltages are present inside the unit.

Installation and use of this equipment must comply to all national
and local regulations and procedures.

To prevent overheating do not obstruct the flow of air for ventila-
tion openings to the unit.

The components inside the unit are not repairable by the user. The
user must not open the UPS cabinet or auxiliary cabinets or re-
move any protective covers from inside the UPS cabinet.

This equipment must be installed and serviced by qualified person-
nel.

The unit contains Lead-Acid batteries which must be disposed of
correctly, in compliance with the local regulations.

To completely isolate the equipment, the switches IRP, IRE,
IBY,IUG and IB must be switched off, the input supply and the
battery supply must be isolated from the UPS and the output
isolated from other modules if the unit is part of a multi-module
system. For 10-30kVA units with an internal battery, intermediate
links must be removed in order to isolate the battery in sections of
a safe working voltage.

High leakage current: connect protective earth before power
supply cables.

Safety Instructions

Advertising