Pioneer DVD-V7300D - Manual (Page 29)

29
En
Settings
Operating the Initial
Setup Menu
DVD .
I
Video CD
. I
CD ..
The initial setup menu enables various settings to be made.
The basic operating method for the initial setup menu and
the locations of the buttons used are explained next.
7 Displaying the initial setup menu
Press
STD-BY/ON
.
When the power has been turned on, proceed to .
Press
SETUP
.
The initial setup menu is displayed.
Example)
The buttons that can be
operated from the screen.
7 Settings that work immediately after chang-
ing, depending on the type of disc
Depending on the type of disc, whether DVD, Video CD or
CD, some settings work immediately after changing. This
player provides confirmation by the color of the indicator to
the left of the selected setting. See the following table.
7Settings that cannot be changed during play-
back
Those settings that cannot be
changed during playback are dis-
played in gray.
Selecting
the aspect ratio
DVD .
Set the aspect ratio to match the television connected to this
player. This setting is unnecessary when connected to a wide-
screen television.
Most DVD movies support a wide-screen television and the
screen size ratio (usually called the aspect ratio) is set to 16:9
(horizontal:vertical). Consequently, if a DVD is viewed on a
television of the conventional size, the 4:3 aspect ratio has
the effect of increasing the height of the image. Set the as-
pect ratio to 4:3 when viewing on a television of the conven-
tional size to eliminate this distortion. This setting cannot be
changed during playback.
Press
SETUP
.
The initial setup menu is displayed.
Select [Video].
Select [TV Screen].
Press the cursor button
(right direction).
Select the preferred item.
Press
ENTER
.
4:3 (Letter Box):
Select when a television of the conventional size is con-
nected and you want to view in the letter box format
(see the next page).
4:3 (Pan & Scan):
Select when a television of the conventional size is con-
nected and you want to view in the pan & scan format
(see the next page).
16:9 (Wide):
Select when a wide-screen television (16:9) is connected
(Setting when shipped).
Press
SETUP
.
÷ If a 16:9 disc with 96 kHz PCM sound is converted to letter
box format and played back, the sampling frequency of the
sound will be downgraded to 48 kHz. To enjoy the sound at
96 kHz, set the screen aspect ratio to wide-screen.
÷ Whether the aspect can be changed or not depends on the
disc. Check the disc jacket, etc. for details.
Color of the indicator
Blue
Yellow
Green
Type of disc
DVD only
DVD/Video CD only
Not affected by the type of disc
Gray
Audio Language -
Subtitle Language -
Auto Language -
Audio1 General Language Video 2
English
English
Other
DVD Language -
Subtitle Display -
English
On
TV Screen
Still Picture -
On Screen Display -
OSD Position -
Angle Indicator -
Audio1 General Language Video 2
Move Exit
16:9(Wide)
Normal
On
4:3(Pan&Scan)
4:3(Letter Box)
SETUP
DTS Out –
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Digital Out – Off
Audio1 General Language Video 2
Move Exit
Off
Dolby Digital
SETUP
Dolby Digital Out –