Pioneer DVD-V7300D - Manual (Page 87)

87
En
Connection/etc.
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
OFF ON
VIDEO 1
VIDEO 2 S-VIDEO
COMPONENT
COMPOSITE (MONO)
AUDIO
OUT
PCM/
DIGITAL OUT R
Y P B P R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
COMPOSITE
VIDEO
OUT TV SYSTEM
AV receiver with digital input for Dolby
Digital.
When connecting the
player to an amplifier
with Dolby Digital in-
puts.
*Make this connection when using this unit with Pioneer’s VSA-E06, VSA-E07 AV amplifier.
÷
Connect this unit’s digital output PCM/ jack to the Dolby Digital input jack of a Dolby Digital compatible amplifier.
÷
Select whether or not to use the coaxial digital output according to the amplifier’s input jack.
VIDEO IN DVD, LD, AUDIO IN PCM/ /DTS
✩ Cables can be found at your local audio/video dealer.
÷
Some discs may not allow digital output when this player’s output down sampling is set for 96 kHz (see page 41).
Connection example 2
Finally, connect to a home wall
outlet.
(Connect the supplied AC cord
which fits to the household AC
outlet)