Av amplifier – Pioneer DVD-V7300D User Manual
Page 88
88
En
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
COMPOSITE
VIDEO
OUT
OFF ON
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
COMPOSITE
(MONO)
AUDIO
OUT
PCM/
DIGITAL OUT
R
Y
P
B
P
R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
TV SYSTEM
INTERFACE CONNECTOR
AUDIO OUT
EXIT SYNC IN
BLACK BURST
COMPONENT VIDEO OUT
COMPOSITE
VIDEO
OUT
OFF ON
VIDEO 1
VIDEO 2
S-VIDEO
COMPONENT
COMPOSITE
(MONO)
AUDIO
OUT
PCM/
DIGITAL OUT
R
Y
P
B
P
R
L
AC IN
AUTO
NTSC
PAL
SIGNAL
GND
TV SYSTEM
AV amplifier
AUDIO IN
VIDEO IN
÷
Surround sound can be enjoyed with amplifiers that have a built-in Dolby Pro Logic decoder.
÷
For more details, refer to the connected component’s operation manual
÷
Connect this player’s audio output jacks to an amplifier’s CD, LD, AUX or other audio input jacks. (Do not connect to PHONO
jacks.)
÷
Connect this player’s video output jack to the amplifier’s video input jack.
Finally, connect to a home wall
outlet.
(Connect the supplied AC cord
which fits to the household AC
outlet)
AV amplifier
Digital Audio recorder
You can connect to a digital audio
recorder as MD,CD-R or DAT.
Digital audio input
Digital audio recorder
(MD player, CD-R player, or DAT
player, etc.)
÷
Connect this player’s coaxial digital output jacks to MD player, CD-R player, or DAT player.
÷
Connect this unit’s digital output PCM/
jack to the digital audio recorder.
NOTE
When you record the Dolby Digital DVD, set [Digital Out-
put] (see page 34) to [Dolby Digital
3
PCM]. If [Digital Out-
put] is set to [Dolby Digital] during recording Dolby Digital
DVD, noise is recorded.
✩
Cables can be found at your local audio/video dealer.
Finally, connect to a
home wall outlet.
(Connect the sup-
plied AC cord which
fits to the household
AC outlet)
By connecting to a regular AV
amplifier or stereo amplifier, you
can enjoy playback with improved
sound quality.
Connection example 3
Connection example 4