Pioneer DVD-V7300D - Manual (Page 66)

66
En
DVD .
Correcting a previously
input Barcode/
Command Stack
Example) To change the Audio setting of step 003 from
2 to 1
1. Press MEMORY .
÷
“BARCODE/COMMAND” is displayed.
2. Press ENTER .
÷
The Barcode/Command Stack screen is displayed.
3. Select “NO” with or and press ENTER .
÷
The Barcode/Command Stack Input screen is displayed
when
ENTER
is pressed.
4. Press DISPLAY
÷
The list display appears.
5. Select “003
‰
” by pressing or .
6. Press
TITLE/CHP
FRM/TIME .
÷
This initiates the Barcode/Command Stack input mode.
7. Press NEXT 4 times to select item “AUDIO”.
8. Press
1
.
9. Press NEXT .
÷
The next step’s Barcode/Command Input screen is dis-
played.
10. Move the
‰
(pointer) to “SAVE” by pressing
and press ENTER .
NOTE:
To save the corrected information, press
NEXT
repeatedly until
the last item flashes (ANGLE in this example).
Press
NEXT
one more time to move to the page for the next
step.
In this “next step”, move ‰ (pointer) to SAVE and press
ENTER
to save data.
The corrected information is not saved if
‰ (pointer) is moved
to SAVE and
ENTER
is pressed before the end of correction (in
the middle of the step being corrected).
DVD .
Adding a step in a previously
input Barcode/Command
Stack
1. Perform steps 1 to 4 of “Correcting a previ-
ously input Barcode/Command Stack”.
2. Select the step where a new step is to be
inserted by pressing
or .
3. Move the
‰
(pointer) to “INS” by pressing
or and press ENTER .
÷
This inserts a new step before the selected step and the
numbers of subsequent steps are incremented by 1.
4. Press
TITLE/CHP
FRM/TIME .
÷
This initiates the Barcode/Command Stack input mode.
5. Set a step in the same way as “Setting a
Barcode/Command Stack settings”.
(See page 61- 64)
6. Move the
‰
(pointer) to “SAVE” by pressing
and press ENTER .
BC/COMMAND STACK GROUP 001: 003
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 05
SUBTITLE 03
AUDIO 1
ANGLE 1
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 003
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 05
SUBTITLE 03
AUDIO 2
ANGLE 1
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001/ 001
001 PLAY
002
003 03:123000–129000
004 05:03–07
03 2 1
005
006
007
008
SAVE DEL INS EXIT
Barcode/Command stack setting