Pioneer DVD-V7300D - Manual (Page 52)

52
En
3. Set the operation to be performed at the
moment timer playback starts.
1. TOP MENU: Setup for playing from top of the menu.
2. TITLE: Setup for playing the specified title and chap-
ter.
÷
Refer to ”Playing the specified title and chapter”.
3. BARCODE/COMMAND STACK: Setup for recalling
the display of the barcode command stack groups
from memory.
÷
Refer to ”Setup for recalling the barcode/command
stack groups from memory” (See page 53).
÷
Select one of the above with or , and press
ENTER
.
NOTE
÷
This step cannot be performed if the power ON time has
not been set.
÷
The data is written in memory at the moment the timer
setup screen is exited. The timer setup will not be stored
in memory if power is turned off before or without exiting
the screen.
÷
On a DVD disc that has been setup to start playback
automatically, the setup made above will not be applied
to the disc.
DVD .
I
Video CD
. I
CD .
Clearing the set time
With the TIMER ON/OFF time input screen (shown left)
displayed, press
CLEAR
and then press
ENTER
of the remote
control unit.
DVD .
I
Video CD . I
CD .
Playing the specified
title and chapter
÷
Move ‰ (pointer) to “2 TITLE” and press
ENTER
.
Example) To begin playback with Chapter 2 of Title 6
NOTE
÷
When a title and chapter are selected, playback continues
after the selected chapter only when there is one or more
chapter after it. Playback completes at the end of the se-
lected title.
If repeat playback is set in the ADV SETUP menu, the se-
lected chapter is played first then the set repeat playback
starts.
÷
When setting tracks on a CD or Video CD, please enter the
track number in the CHAPTER in the above setting. At this
time TITLE and BARCODE/COMMAND STACKs settings
will not operate.
A: Press
0
= 6 = NEXT =
0
= 2
= NEXT
.
B: Press or to select 06 and press
ENTER
to start the setting of the next set of
figures. Now press or to select
02 and press ENTER .
TIMER ON/OFF WED
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
17 45 10 30
CLEAR RETURN ENTER
3 1
2
TIMER ON/OFF WED
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
17 45 10 30
CLEAR RETURN ENTER
TIMER ON/OFF WED
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
17 45 10 30
CLEAR RETURN ENTER
00–04–29 SAT 08:15.00
RETURN
MON
TUE
WED
THU
FRI
SAT
SUN
ALL
10 30 17 45 T06:C02
3
TIMER ON/OFF WED
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
17 45 10 30
CLEAR RETURN ENTER
Pointer
Weekly timer function operation/display
÷
Select ENTER on the screen to enter the setting and exit
the screen. Select RETURN to cancel the setting and return
to the previous screen.
For your reference
Memorized data is not erased even if AC
power cord is unplugged.