Pioneer DVD-V7300D - Manual (Page 74)

74
En
DVD .
Recalling/executing barcode
commands in memory
To excute a barcode command group:
Load the disc to excute them.
1. Press RECALL .
2. Press PREV .
3. Input the number of the command group to
be recalled/executed using the numeric
buttons.
4. Press NEXT twice.
÷
This recalls and executes the selected group.
To execute steps in a command group:
Load the disc to excute them.
1. Press RECALL .
2. Press PREV .
3. Input the number of the command group to
be recalled/executed using the numeric
buttons.
4. Press NEXT .
÷
To re-enter the group number, press
PREV
.
5. Input the number of the step to begin ex-
ecution using the numeric buttons.
6. Press NEXT .
÷
This recalls and executes the selected and subsequent
steps in the selected group.
NOTES:
÷
Pressing
REPEAT
repeats the execution of the set GROUP.
÷
If you press
STEP
in place of
NEXT
in step 6 above, command
steps will be executed step by step. After one step has been
executed, press
NEXT
to advance to the next step. Pressing
PREV
allows you to return to the previous step.
Using a Barcode/Command Stacks
BC/COMMAND STACK GROUP 001: 001
BC/COMMAND STACK GROUP 001: 001
Switching the command group
Recall screen
Recall screen
Switching the command step
NOTE
The system cannot enter this mode during display of the player
control panel.