Pioneer DVD-V7300D - Manual (Page 62)

62
En
Example 3) To “Play Title 3 Frames 123000 to 129000”
Example 4) To “Play Title 5 Chapters 3 to 7 with Subtitle 3,
Audio 2 and Angle 1”
1. Press
TITLE/CHP
FRM/TIME .
÷
The TITLE number will blink.
2. Press 3 = NEXT .
÷
Title 3 is set, and the mode switches to Frame Input.
3. Press 1 = 2 = 3 = 0 = 0
= 0 = NEXT .
÷
This sets the start frame number.
÷
If the operation up to the present has been performed
during playback, the input start frame is searched
now.
4. Press 1 = 2 = 9 = 0 = 0
= 0 = NEXT .
÷
This sets the end frame number.
÷
If the operation in steps 3 and 4 is performed during
playback, you can press
ENTER
in place of specifying
the frame number in steps 3 and 4 above. In this
case, the frame number being played is input auto-
matically.
1. Press
TITLE/CHP
FRM/TIME .
÷
The TITLE number will blink.
2. Press 5 = NEXT .
÷
This sets title 5 and the chapter input mode starts.
3. Press
TITLE/CHP
FRM/TIME to select SEARCH CHAPTER.
÷
This item sets the chapter number where playback
should start.
÷
Each press switches “CHAPTER” and “FRAME” al-
ternately.
4. Press 3 = NEXT .
÷
This sets the start chapter number.
5. Press 8 = NEXT .
÷
This sets the end chapter number.
6. Press 3 = NEXT .
÷
This sets Subtitle 3.
7. Press 2 . (Do not press NEXT .)
÷
This sets Audio 2.
8. Press
1
. (Do not press NEXT .)
÷
This sets Angle 1. Now go to the next step.
For your reference
To play chapter 7 till the end as shown in Example 4), enter
“8”, obtained by adding 1 to 7, in MARK CHAPTER.
BC/COMMAND STACK GROUP 001: 001
TITLE 03
SEARCH FRAME 123000
MARK FRAME 129000
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 001
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 08
SUBTITLE 03
AUDIO 2
ANGLE 1
SAVE DEL INS EXIT
Display when the example on
the right is input
Display when the example on
the right is input
Barcode/Command stack setting
Note
The difference between search frames and mark frames can-
not be set to 24 frames or less. The entry must be 25 frames
or greater.