Connecting the player, Connection of mouse and keyboard – Pioneer DVD-V7300D User Manual
Page 84
84
En
Connection of mouse and keyboard
A commercially available PS/2 mouse or PS/2 keyboard can be
connected to this unit’s mouse/keyboard connector as follows.
1.
Turn this unit’s POWER off to set it to the
standby mode.
2.
Connect the PS/2 mouse or PS/2 keyboard
to this unit’s mouse/keyboard connector.
3.
Turn this unit’s POWER ON.
Connection is now complete.
If you want to use both the mouse and keyboard, connect
them using a commercially available “Y” cable.
Note:
÷
The power rating of this mouse/keyboard connector is
no more than 5V 100mA. Do not use a mouse or key-
board with a current drain exceeding the rating of 100mA.
÷
Certain commercially available PS/2 mouse models, PS/
2 keyboard models and “Y” cables may not be compat-
ible with this unit. For details, please consult PIONEER
technical support.
TV SYSTEM selector
Video output changes as follows according to the playback disc’s
recorded format.
NTSC-PAL, PAL-NTSC conversion is possible on Video CDs.
PAL-NTSC conversion is not possible on DVDs. When the TV
SYSTEM selector is set to the AUTO position, the disc’s format
will be output as is. When a CD or disc is not loaded, the previ-
ous video output will be selected.
About MOD. (Modulation) PAL
Most model of the newly developed countdown PAL TV sys-
tem detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrink-
age. On some TVs, the picture may shrink vertically, leaving
black bands at the top and bottom of the screen. This is not
malfunction; it is caused by the NTSC-PAL conversion.
If your PAL TV does not have a V-Hold control, you may not
be able to view NTSC disc because the picture may roll. If the
TV has V-Hold control, adjust it until the picture stop rolling.
Disc
Type
Format
DVD
NTSC
PAL
Video CD
NTSC
PAL
CD, No disc
Output format
Position of TV SYSTEM selector
NTSC
PAL
AUTO
NTSC
MOD. PAL
NTSC
–––
PAL
PAL
NTSC
MOD. PAL
NTSC
NTSC
PAL
PAL
NTSC
PAL
NTSC or PAL
AUTO
NTSC
PAL
TV SYSTEM
“Y” cable
Connecting the player