Pioneer Plasma Display Monitor 502MX - Manual (Page 113)

113
3) Adjusting the SCREEN
The items that can be adjusted here are H.POSITION, V.POSITION, V SIZE, CLK FREQ and CLK PHASE.
(NOTE) With this unit, H. SIZE cannot be adjusted.
1 Before entering the integrator mode, switch the unit to the
specific input (one of INPUTs 1 to 4) in which adjustments
will be made (refer to section 5.4.1, “About the integrator
mode”).
The ID number of the unit of items will be indicated in the
upper right corner of the screen, where “– –” is displayed
in the illustration.
Select SCREEN.
2 Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the SCREEN
adjustment values to their factory preset values (center
values).
Push the 2 button on the remote control or operating panel
on the main unit to return to screen 1.
3 Make the necessary adjustments.
(NOTE) V.SIZE can only be adjusted when video signals
are being received. CLK FREQ and CLK PHASE can
only be adjusted when PC signals are being
received.
(NOTE) Three SCREEN parameter settings are required for
each display screen size when displaying 1280 x
1024 / 60 Hz input. (1 For the 4:3 TYPE screen
size, 2 For the FULL TYPE screen size, 3 For the
ZOOM screen size)
Adjustments can be made using the 2 and 3 buttons (or
the
5 and ∞ buttons for V.POSITION and V.SIZE) on the
remote control or the operating panel of the main unit.
Values set and adjusted for H.POSITION, V.POSITION, V.SIZE, and CLK FRQ. serve as median values when
adjustments are made in the menu mode.
CLK PHASE uses the same data as in menu mode.
Press the SET button to return to Screen 2.
<Adjustable Range> 0 to 255 (median 128) for H.POSITION and V.POSITION
64 to 191 (median 128) for V.SIZE, CLK FREQ
0 to 16 (median 8) for CLK PHASE
<Adjusting Order> For the sake of efficiency, make adjustments in the following order:
V.POSITION = H.POSITION = CLK FREQ = H.POSITION = CLK PHASE
Integrator Mode
WHITE BAL.
MENU
3SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
V. POSI. : 128
V. SIZE : – – –
CLK FRQ : 128
CLK PHS : 8
DEFAULT
H. POSI. : 128
ALL DEFAULT
– –
SCREEN
128 H.POSITION
– –
WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
V. POSI. : 128
V. SIZE : – – –
CLK FRQ : 128
CLK PHS : 8
DEFAULT
3H. POSI. : 128
ALL DEFAULT
– –
]
Screen 1
]
Screen 2
]
Screen 3