Pioneer Plasma Display Monitor 502MX - Manual (Page 78)

78
Speaker System
4.9.4 Mounting with the plasma display ceiling suspension hardware (PDK-5002)
Monitor mount bolt
(supplied with ceiling-
suspension plasma display
mounting hardware)
Hole rivet
When mounting the plasma display, with the optional speakers attached, to the ceiling suspension hardware, first
attach the speakers to the display with monitor mount bolts, as shown in Figure 2 . Next, referring to Figure 3 ,
monitor mount bolts to fasten the ceiling suspension hardware to the display, using the washers (
φ
25 mm in outside
diameter) supplied with the original speaker.
Follow the normal mounting procedure to attach the mounting hardware to the display.
Mounting the optional speakers to the display makes it difficult to see the monitor mount bolts. Take care while
performing mounting work.
Monitor mount bolt
(supplied with ceiling-
suspension plasma
display mounting
hardware)
Figure 2