Pioneer Plasma Display Monitor 502MX - Manual (Page 115)

115
Integrator Mode
5) Setting the color mode
In addition to COLOR MODE 1, which is for normal use, this unit also has the independent COLOR MODE 2, for
which the PICTURE and WHITE BALANCE adjustment values have been set to the optimum values for TV studio
retakes. (See ‘5.4.5 PICTURE and WHITE BALANCE adjustment values memory area tables’)
Please change the COLOR MODE setting according to the use.
Factory preset : COLOR MODE 1
1 Enter the integrator mode (refer to section 5.4.1, “About
the integrator mode”).
The ID number of the unit of adjustment items will be indicated
in the upper right corner of the screen where “– –” is displayed
in the illustration.
Select OPTION 1.
2 Move the cursor to COLOR MODE, and select the desired
color mode with the SET button.
Pressing the SET button toggles the color mode between 1
and 2.
When you switch the COLOR MODE, all of the input
functions and the PICTURE and WHITE BALANCE
adjustment values for the input signal switch over all at once.
COLOR MODE affects every input (INPUTs 1 to 4).
Select EXIT in screen 2 to return to screen 1.
(NOTE) The current color mode can be identified by the ID display color.
Cyan: COLOR MODE : 1
White: COLOR MODE : 2
WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
3OPTION 1
OPTION 2
SUB VOLUME
G LEVEL : 128
B LEVEL : 128
V. SIZE : 128
CLK FRQ : – – –
CLK PHS : – – –
DEFAULT
R LEVEL : 128
MENU : MENU OFF
5∞ 3 : SELECT
ALL DEFAULT
– –
OPTION 1
EXIT
– –
MIRROR MODE : OFF
BRIGHT ENHANCE
VIDEO : OFF
3COLOR MODE : 1
PC : OFF
]
Screen 1
Screen 2
]