Pioneer Plasma Display Monitor 502MX - Manual (Page 114)

114
Integrator Mode
4) Adjusting the side mask
The side mask adjusts the brightness of no-image areas appearing on the fringe of the screen when the screen size
is set to 4 : 3 NORMAL or to ORIGINAL, for example.
The brightness of each color of RGB can be adjusted separately.
In adjusting the side mask, think of how video signals develop with time, and also of a balance in brightness between
the adjacent display sets.
(NOTE) During adjustment, a striped pattern may appear on the mask. This is not a fault.
1 Enter the integrator moe. (refer to section 5.4.1, “About
the integrator mode”).
The ID number of the unit of items will be indicated in the
upper right corner of the screen, where “– –” is displayed
in the illustration.
Select SIDE MASK.
2 Select the desired adjustment item.
The screen size may momentarily switch.
Press the 2 button on the main unit operation panel in order
to return from Screen 2 to Screen 1.
3 Select the desired option.
Make the adjustments using the 2 and 3 buttons on the
remote control or the operating panel of the main unit.
Press the SET button to return to screen 2.
<Adjustable range> 0 to 255 for every item
SIDE MASK applies to all inputs (INPUTs 1 to 4).
Note that with side mark adjustment, there is no function
for returning to the initial values (DEFAULT). Please take
due caution.
(NOTE) In the case that display with a side mask is impossible (for example in the case of high vision TV (HDTV)
signal input etc.) side mask adjustment cannot be carried out.
WHITE BAL.
MENU
SCREEN
PICTURE
3SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
G LEVEL : 128
B LEVEL : 128
V. SIZE : 128
CLK FRQ : – – –
CLK PHS : – – –
DEFAULT
R LEVEL : 128
MENU : MENU OFF
5∞ 3 : SELECT
ALL DEFAULT
– –
WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
G LEVEL : 128
B LEVEL : 128
V. SIZE : 128
CLK FRQ : – – –
CLK PHS : – – –
DEFAULT
3R LEVEL : 128
MENU : MENU OFF
5∞ 3 : SELECT
ALL DEFAULT
– –
WHITE BAL.
SIDE MASK
SCREEN
PICTURE
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
BRIGHT : 128
COLOR : 132
TINT : 132
SHARP : 128
DETAIL : 128
RESET
128
3CONTRAST : 128
MENU : MENU OFF
R LEVEL
DEFAULT
– –
]
Screen 1
Screen 2
]
Screen 3
]