Pioneer Plasma Display Monitor 502MX - Manual (Page 119)

119
9) Setting the baud rate
When controlling or adjusting the unit from a PC, the RS-232C port can be set to one of five baud rates: 1200, 2400,
4800, 9600, and 19200 BPS.
Factory preset: 4800 BPS
1 Enter the integrator mode (refer to section 5.4.1, “About
the integrator mode”).
The ID number of the unit of adjustment items will be indicated
in the upper right corner of the screen, where “– –” is displayed
in the illustration.
Select OPTION 2.
2 Move the cursor to “BAUD RATE” and change the mode
with the SET button.
You can cycle through the available values by repeatedly
pressing the SET button:
1200 BPS
= 2400 BPS = 4800 BPS = 9600 BPS =
19200 BPS = ···
BAUD RATE applies to all inputs (INPUTs 1 to 4).
Select EXIT in screen 2 to return to screen 1.
Set the unit baud rate to match that of the PC in use.
With long RS-232C cables, we recommend using lower baud rates.
Integrator Mode
WHITE BAL.
MENU
SCREEN
PICTURE
SIDE MASK
OPTION 1
3OPTION 2
SUB VOLUME
ALL DEFAULT
– –
OPTION 2
EXIT
– –
3BAUD RATE : 4 8 0 0 BPS
FULL MASK : OFF
FAN CONTROL : AUTO
TEMPERATURE :
OSD : ON
HOUR METER : 3 4 5 HRS
]
Screen 1
]
Screen 2