Pioneer Plasma Display Monitor 502MX - Manual (Page 48)

48
Handling the Standard Mounting Components
4.2 Handling the Standard Mounting Components
4.2.1 Handling precautions
This section of the manual discusses ways to mount, install, and handle the mounting hardware exclusively designed
for our plasma displays. Mounting should be performed by qualified experts.
Refer all installation and mounting work to qualified persons, or request assistance from a Pioneer dealer.
4.2.2 Precautions for installation contractors
1) Before installation
Observe the specifications supplied in 3.1 “Installation Site Requirements”.
2) During Installation
Carefully read and observe the contents of this section of the manual.
The installation work should be performed by two or more people.
3) After installation
After installation the mounting hardware, check for adequate strength and properly tightened screws. Repeat this
inspection after mounting the display.
4) Delivering to the customer
(1)Explaining mounting precautions
We ask that the mounting contractor explain the following precautions to the customer after mounting and
installation work is completed. Even if the particulars of an installation are letter-perfect, your work may be perceived
as inadequate unless you patiently and thoroughly explain these precautions so that the customer fully understands
them.
¶ The following are highly dangerous and must be avoided at all times:
• Any sudden application of force, including pushing and pulling
• Splashing water on the unit
• Placing any object on the unit
• Touching mount screws and other mounting hardware
¶ For worry-free use of the unit:
• If any problem arises, the user should immediately ask the installation contractor to conduct inspection and
repair.
• To guard against accidents, ask the customer not to make any tilt or height adjustments. Such work should be
referred to the installation contractor.
(2)Mounting contractor contact form
We ask the mounting and installation contractor to complete the contractor contact form supplied with the unit
and give it to the end-user after post-installation inspections are complete and the above precautions have been
explained.
(3)Periodic inspections
Over time, aging of various components of the suspension/mounting hardware that are not readily visible may
render the installation unreliable. This may possibly lead to the display breaking free of its mounting. Please
recommend periodic inspections.